Window Washers

Tips for Window Washers to Reduce Streaks When Window Washing

In this article, we’re going to talk with window washers about how you can reduce streaks when window washing. To reduce streaks in the future, don’t use a circular motion while applying the squeegee. Instead, use a back-and-forth motion and then allow the water to evaporate before wiping off any leftover residue with a clean cloth.

Here are the basics of how to reduce streaks when window washing:

• Don’t use circular motions when applying your squeegee; use a back-and-forth motion instead.
• Apply light, even pressure to the squeegee. This will help prevent streaks and ensure that you’re not tearing the squeegee in multiple directions. Be careful when using this method with heavy water flow; if there is too much water on one side of your squeegee and not enough weight to hold it down, you may tear or damage your tool.
• If you see any streaks forming while applying the soap solution, stop what you’re doing and wipe off any excess soapy fluid right away with a clean cloth. Make sure no streaks remain on the window before you squeegee off the soap residue.
• Allow any leftover liquid to dry completely before wiping down your windows with a clean cloth. This is most easily accomplished by moving your ladders around every few minutes and then taking them away from the building for an hour or two, if possible.
• Use care that you don’t spray more water on one side of your squeegee than the other; this will prevent streaks as well.
• Thoroughly clean your squeegees on a regular basis while you’re washing windows.
• Ideally, you want to squeegee out water in the shade. If it’s sunny outside, however, you’ll need to wipe off any excess moisture before it dries, or else your windows may streak.
• You can also avoid streaks by always making sure that there’s enough liquid in your reservoir (the solution tank) to fully coat the squeegee blade. Also, be careful not to pull or drag your squeegee across wet glass; make sure it’s gliding smoothly over the surface before adding any pressure.

These are just some tips for how to reduce streaks when window washing. You can reduce streaks in the future by making sure you’re using a back-and-forth motion with the squeegee and avoiding circular motions while applying the solution. Also, make sure that no streaks are present on your windows before you wipe them down with a clean cloth. Try to use this method when possible; if the sun is too bright, do your best to avoid creating streaking by wiping away excess fluid right away, allowing all of it to dry completely before wiping down all residue with a clean cloth.

Remember that there’s no guaranteed, correct way to window wash; everyone does it differently and gets different results! This is just a method of how to reduce streaks when window washing that you can use to help keep your windows streak-free without too much trouble.

Now that you know how to reduce streaks when window washing, aren’t you excited to go out and get your hands wet? Keep this article in mind, though; it’ll be helpful next time you wash windows!